News

Factors Affecting the Efficiency Of CNC Machining

Reasonable cutting amount can improve the efficiency of CNC machining center. When the cutting speed is increased by 10 times and the feed speed is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change. As a result, the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, the cutting heat remaining on the workpiece is greatly reduced, and the cutting vibration is almost Disappeared; a substantial leap in cutting. According to the current situation of CNC CNC machining centers, increasing the feed per tooth increases the productivity and tool life.


The effect of the tool on the CNC machining center is just like the effect of the wheel on the car. The materials used to make the tools must have high high temperature hardness and abrasion resistance, the necessary bending strength, impact toughness and chemical inertness, good processability (cutting, forging and heat treatment, etc.), and they are not easy to deform. Good tools can improve the efficiency of machining and the accuracy of the workpiece being cut.


Other factors such as power supply, familiar operation, and reasonable materials will affect the machining efficiency of the CNC machining center.


In short, there are many factors that affect processing efficiency and product quality, and they are often the result of comprehensive effects. It is not possible to improve processing efficiency and quality by simply changing a certain factor. In the actual processing process, it is necessary to continuously improve the processing method and use new technologies, new processes and new materials to achieve higher processing quality and processing efficiency.


You Might Also Like

Send Inquiry