Resource / Blog

Main parts of industrial aluminum profiles

Industrial aluminum profiles have a wide variety of accessories, which can basically meet the needs of designers. The main accessories are bolts, nuts, corner pieces, connectors, end connection plates, spacer blocks, elastic fasteners, living hinges, hooves and casters.


The connection parts mainly include built-in connection parts, angle groove connection parts, groove strip connection parts, triangle connection parts and angle connection parts. The built-in connector is mainly used for cross connection or vertical connection of profiles. When assembling, it is necessary to punch the installation process holes at the specified size of the profile in order to bury the accessories. At the same time, place the elastic nut in the groove of another profile and then lock it. Bolts; angle slot connectors are E-type and L-type.


They are used for right-angle connection of two profiles. During installation, insert both ends of the profile into the grooves of the profile, and then tighten them with set screws. The installation must be based on the profile. The groove width and connection method are selected with different angle pieces. The groove strip connection is used for the straight extension connection between two profiles. When installing, insert it into the groove at the joint of the two profiles, and then use set screws Locking; the triangular connection is a special connection for semi-circular profiles, which can connect two or three profiles together, and the matching cover plate is very simple and beautiful; the angle connection is used for the two profiles that are not 90 ° Beveled connection, it is hidden inside the profile during installation.

You Might Also Like

Send Inquiry