What to pay attention to when processing aluminum profiles
1. Temperature
The aluminum profiles on the cooling bed must not be rubbed, pulled, overlapped, crowded, entangled with each other during the process of reclaiming, moving and stretching, and a certain interval should be reserved. Handle the profiles that are easy to bend and have short discharge, and protect them accordingly if necessary. The stretching of the profile must be cooled to a fixed temperature (the bare hand can hold it tightly) before it can be moved to the stretching frame for stretching work. If the temperature is too high, stretching will burn the human body, burn the top, and Can not completely eliminate the internal stress of aluminum profiles.
2. Shaped pieces
Due to the effect of wool tops in preventing heat dissipation, profiles with high decorative surface requirements must be turned upside down and up to facilitate uniform heat dissipation and reduce lateral bright spot defects due to uneven heat dissipation and different crystallinity, especially wide-area aluminum profiles, More attention should be paid to thicker sections. Pay attention to the stress of small feet, thin teeth, long legs, arc surfaces, inclined surfaces, openings, angles, etc. of profiles such as high width-to-thickness ratios, long cantilever walls, large arcs, large wall thicknesses, weird shapes, etc. Defects such as dot-like size deformation, twisting, and spiraling occur, which require comprehensive protection of the hardness and finish of the product.
